Key takeaways
- Compare the best replacement armrests for gaming chairs, from 4D pairs to pad-only fixes, with the mounting measurements to check before you order.
A gaming chair rarely dies all at once. The seat foam holds up, the backrest still reclines, but one armrest wobbles, the height button stops catching, or the pad cracks along the edge you lean on during long sessions. Armrests are one of the few chair parts you can swap at home with basic tools. A full replacement pair brings a fresh bracket, a working adjustment mechanism and a new pad in one job, and it can make a three-year-old chair feel solid again.
This guide covers replacement armrests only: complete arm assemblies that bolt to the underside or sides of the seat, plus one pad-only option for chairs whose brackets are still sound. That is a different job from adding a strap-on cushion over a worn pad. Fit comes before everything else here, because there is no single universal mount. Every pick below lists the mounting details its seller publishes.
Disclosure: As an Amazon Associate, we earn from qualifying purchases made through links in this article, at no extra cost to you.
Quick Picks
| Product | Best for | ASIN |
|---|---|---|
| Frassie 4D Armrest Pair | Best overall | B09WQCZ2V3 |
| Skuehod 4D Armrest Pair | Two-hole mounts | B09JYFKM62 |
| Skuehod 3D T-Arms | Simpler adjustable pair | B09JYYBZ1H |
| Generic Universal Armrest Replacement Pair (4-Hole) | Fixed replacement pair | B0CY9BLJS6 |
| Ketofa Arm Rest Replacement Pair | Pad-only refresh | B07KPT1L3Z |
How to Choose
Measure the mounting pattern first
Look underneath the seat at how the current armrest attaches. Count the fixing holes and measure from the centre of one hole to the centre of the next, in both directions if the holes form a rectangle. Several pairs in this guide use a two-hole pattern with 2.36 inches of centre spacing, but other chairs use wider or narrower layouts, and a mismatch of a few millimetres is enough to stop a bolt from seating. Check the slots too: the screw has to pass through and bite into the chair frame with its full thread.
Decide between a full assembly and a pad-only swap
If the upright is bent, the bracket is cracked, or the height mechanism slips under load, the whole arm has to go, and you need a complete pair with brackets like the Frassie and Skuehod sets below. If the bracket and mechanism are tight and only the top surface is split or peeling, a pad-only replacement such as the Ketofa pair is a smaller job that leaves the working hardware in place.
Understand the adjustment labels
Replacement armrests borrow the same shorthand as new chairs. Height-only arms move up and down. 3D arms typically add forward-and-back sliding or pad rotation on top of height. 4D arms add sideways movement as well, so the pad can shift in or out to match your shoulder width. The labels are not enforced by any standard, and two brands can mean slightly different movements by the same label, so read the movement list in each listing.
Check bracket shape and clearance
The bracket has to clear the seat edge, sit flat against the mounting surface, and leave the pad inside the footprint of your desk opening. T-shaped uprights, linkage-style arms and straight posts all mount differently. Compare the shape of your old arm with the product photos, confirm the pair includes left and right pieces rather than two identical arms, and keep your original screws until the new hardware is in hand.
Plan the swap itself
Most pairs in this guide ship with an installation package and instructions. Support the chair so it cannot tip while you work, loosen one side at a time, and never force a bolt into a hole that does not line up. If the mounting points on the chair are stripped or torn, no replacement arm will fix that, and the chair maker is the right source for a model-specific part.
The 5 Best Replacement Armrests for Gaming Chairs
Frassie 4D Armrest Pair
Specs
- Sold as a pair with left and right armrests
- 4D adjustment: height, forward and back slide, sideways movement and pad rotation
- Two-axis mounting pattern of 2.36 x 1.2 inches
- Installation package and instructions included
- Replacement brackets included, not pads alone
The Frassie pair is the most complete swap in this guide. It replaces the whole arm, bracket and mechanism included, and the pads move in four directions: up and down for desk height, forward and back for keyboard versus controller positions, sideways for shoulder width, and rotation for angling the pad toward your body. That range makes it the easiest set here to dial in once bolted on, at a desk or reclined.
The catch is the mounting pattern: the published 2.36 x 1.2 inch layout has to match the holes under your seat, and no adjustment range helps if the bracket cannot bolt down flat. Measure against those two figures before ordering; swapping full brackets is a longer job than changing a pad. If your measurements line up, this pair most closely recreates the feel of a new mid-range gaming chair.
Best for: A full armrest rebuild with the widest adjustment range.
Skuehod 4D Armrest Pair
Specs
- Sold as a pair with installation package and instructions
- Two-hole mounting with 2.36 inch centre spacing
- Slot size of 0.8 x 0.4 inches
- Side button controls the height adjustment
- 4D pad movement as listed by the seller
The Skuehod 4D pair is aimed at chairs that mount their arms with two bolts per side. The listing leads with the fit numbers that matter: 2.36 inches between hole centres and slots measuring 0.8 x 0.4 inches, so you can compare your bracket against hard figures instead of a vague promise of wide compatibility. Height changes are handled by a button on the side of the upright, the arrangement most gaming chairs use, so the controls feel familiar.
One caution from the published figures: the height interval and travel numbers in the listing do not fully agree with each other, so treat the exact travel as approximate and lean on the hole spacing and slot size as the deciding checks. Compare the bracket outline in the photos with your old arm as well. For a two-hole chair that matches the spacing, this pair offers 4D movement without guesswork about what is in the box.
Best for: Chairs with two-hole armrest mounts that match the listed spacing.
Skuehod 3D T-Arms
Specs
- T-arm design, sold as a pair
- Upright replacement brackets included
- Side button height adjustment with about 3 inches of travel
- 3D adjustment with fewer moving directions than the 4D pairs
If your chair never needed sideways pad movement, the Skuehod 3D T-Arms cover the essentials with less to go wrong. This is still a full replacement: the pair includes the upright brackets, so a cracked post or a dead height mechanism gets replaced along with the pad. The side button gives roughly three inches of height travel, enough to line the pads up with most desk surfaces and to drop them clear when you slide the chair in.
The listing is thinner on detail than the 4D sets and does not spell out every adjustment direction, so the mounting-hole pattern needs confirming against your chair before you commit. In return you get a simpler mechanism with fewer sliding joints, which usually means fewer sources of play and rattle over time.
Best for: A straightforward height-adjustable replacement with full uprights.
Generic Universal Armrest Replacement Pair (4-Hole)
Specs
- Pair of two replacement armrests
- PP construction with a movable linkage design
- 4-hole mounting variant (a 5-hole variant is also listed)
- Overall size of 37 x 6.5 x 28 cm
- Item weight of 3.15 pounds for the pair
- Listed for computer, office and gaming chairs
- Assembly instructions included
Not every broken arm belongs to an adjustable chair. Plenty of gaming and office chairs use a fixed or simple linkage arm, and this generic pair is built for those. The two arms are moulded PP with a movable linkage and mount through a four-hole pattern; the seller also lists a five-hole version, so count the holes on your chair and pick the matching variant. At 37 cm long, the arms suit full-size seats rather than compact task chairs.
There is no height button or sliding pad here, and that is the point: fewer mechanisms means fewer failure modes, and the swap is a simple unbolt and rebolt job. The trade-off is that your seating position has to work with the fixed geometry, since nothing adjusts after fitting. Check the overall length against your old arm and confirm the hole count lines up, because the pattern still has to match your chair.
Best for: Replacing fixed or linkage arms on chairs without height adjustment.
Ketofa Arm Rest Replacement Pair
Specs
- Pad-only replacement, sold as a pair with left and right pads
- Polyurethane pad surface
- Pad size of 10 inches long x 4 inches wide
- Fits 4 inch mounting hole patterns
- Underside bracket cutout of 5 7/8 inches
- Screw set included
- Listing gives a 250 pound maximum weight recommendation
The Ketofa pair is the one pick here that is not a full assembly, and it earns its place for a common situation: the bracket is straight, the mechanism works, but the pad itself is cracked or the surface has worn through. These PU pads bolt onto your existing brackets using a 4 inch hole pattern, with a cutout on the underside sized to sit over the bracket. The included screw set means you are not hunting for matching fasteners, and the left and right pads are shaped differently, so match each to its side before tightening down.
Because the pads reuse your hardware, the fit check is about the bracket, not the chair: measure the hole spacing on your current pads and the width of the bracket the pad has to clear. If those two figures match the listing, this is the quickest repair in the guide and the only one that keeps the original adjustment feel of the chair. If your arms also wobble at the post, choose one of the full pairs above instead.
Best for: Refreshing worn pads when the brackets and mechanism are still sound.
FAQ
Are replacement armrests universal?
No. Hole spacing, slot size, bracket shape and screw threads all vary between chair models. Measure the mounting points on your chair and compare them with the figures in the listing before ordering. A pair described as fitting most chairs still has to match your pattern.
Should I replace the full armrest or just the pad?
Replace the pad alone when the bracket is straight, the mount is tight and the adjustment mechanism still holds its position under load. Choose a full pair when the upright is damaged, the height button no longer catches, or the arm wobbles at its base, because a fresh pad cannot correct play in the hardware underneath.
What does 4D mean on a replacement armrest?
It means the pad adjusts in four directions: height, forward and back, side to side, and rotation. 3D arms drop one of those movements, usually the sideways slide. The labels are set by each seller rather than a shared standard, so confirm the actual movement list in the product description instead of relying on the badge.
How do I measure my chair before ordering?
Look underneath the seat and count the fixing holes on one armrest bracket, then measure centre to centre between them, in both directions if there are four holes. Note the slot size, the overall length of the old arm, and whether the left and right arms are mirror shapes, then compare every figure with the listing.
Conclusion
A worn armrest is one of the most fixable problems a gaming chair can have. Begin with the mounting pattern, since no pick in this guide helps if it cannot bolt to your seat. For a full rebuild, the Frassie 4D pair leads the list; the Skuehod 4D pair suits two-hole mounts and the 3D T-Arms keep things simpler. Fixed-arm chairs are covered by the generic four-hole pair, and the Ketofa pads handle the pad-only refresh. Measure twice, match the pattern, and a chair you were ready to replace can feel solid again.
FAQ
Are replacement armrests universal?
Should I replace the full armrest or just the pad?
What does 4D mean on a replacement armrest?
How do I measure my chair before ordering?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.




