Updated Nov 21, 2026· 10 min read

Key takeaways

  • Housing swaps for DualSense, Xbox Series X|S and Switch Joy-Con: five controller shell kits compared on fit, model codes, tools and what is in the box.

A controller shell replacement kit is the deepest cosmetic mod you can give a gamepad. Unlike a skin or a silicone sleeve, which sit on top of the housing, a shell kit replaces the housing itself. You open the controller, lift the board, sticks and button membranes out of the old casing, and rebuild the pad inside fresh front and back plates. Done well, the result looks like a limited-edition pad the platform holder never sold.

Our top pick: eXtremeRate Luna Redesigned Full Set Shell for PS5. Runner-up: eXtremeRate Luna Wood Grain Front and Back Shell Set for PS5.

People reach for these kits for two reasons. The first is repair: grips crack near the screw posts, faceplates scuff, and a tired launch-day pad can feel new again with fresh plastic. The second is personal style: clear shells that show the board inside, wood grain and glow finishes, and soft touch colors you cannot buy off the shelf. This guide compares five kits for the PS5 DualSense, the Xbox Series X|S controller and the Nintendo Switch Joy-Con.

Disclosure: As an Amazon Associate, we earn from qualifying purchases made through links in this article, at no extra cost to you.

Quick Picks

Product Best for ASIN
eXtremeRate Luna Redesigned Full Set Shell for PS5 Full DualSense rebuilds on newer revisions B0F298RLVZ
eXtremeRate Luna Wood Grain Front and Back Shell Set for PS5 Widest DualSense model coverage B0C58VH238
eXtremeRate ASR Full Set Shell Buttons for Xbox Core Complete Xbox rebuild with grip texture B0FKMZ869T
eXtremeRate Racing Green Front Faceplate for Xbox Series X/S A quick front-only refresh B08QYVBGX9
eXtremeRate DIY Shell Buttons Set for Nintendo Switch Console and Joy-Con matching makeover B07MKTZYTP

How to Choose a Controller Shell Kit

Match the model code before anything else. Shells are molded for one exact controller generation, and close is not close enough. DualSense pads carry a BDM code on the rear label: BDM-010 and BDM-020 are the early builds, BDM-030, BDM-040 and BDM-050 are the later ones, and kits are cut for one group or the other. The current Xbox pad is model 1914, sold as the Series X|S and Core controller, and its shell differs from older Xbox One pads. Joy-Con shells fit the original Switch and the OLED model’s Joy-Con, but the Pro Controller uses a different housing. Compare the code on your pad with the kit listing, not the product name alone.

Decide between a full set and a front-only plate. A full set replaces the front shell, back shell and usually the buttons and touchpad cover, so every visible surface matches. A front-only faceplate is a shallower job: fewer screws, no need to move the board, and a lower spend, but the back keeps its original color and wear. If your grips are cracked, go full set.

Check what is in the box. Good kits include the screwdrivers the job needs, spare screws and an opening tool. Button sets vary: some include thumbsticks and accent rings, others leave you to reuse the originals. A full set with bundled buttons gives the most uniform result, since every piece shares one finish.

Pick a finish you can live with. Hard ABS and polycarbonate shells come in glossy, matte and clear versions. Soft touch coatings feel grippier but pick up marks. Rubberized grip shells add molded texture to the handles, a genuine comfort upgrade for long sessions.

Be honest about the install. No soldering is involved, but you will handle ribbon cables, trigger springs and small screws, and the DualSense touchpad carries a bonded cover that needs gentle heat to move over. Makers publish video guides for each kit; watch the one for your pad before you order, and keep the original shell and screws in a labeled bag so the mod can be reversed.

The Kits

eXtremeRate Luna Redesigned Full Set Shell for PS5

Specs

  • Fits PS5 DualSense models BDM-030, BDM-040 and BDM-050
  • Full set: front and back shells, full button set and touchpad cover
  • Durable non-toxic ABS plastic, odour free
  • Glow in Dark Green finish
  • Molded to sit flush on all clips, like the original housing
  • Compatible with eXtremeRate RISE and RISE4 remap kits, face clicky kit and LED kit
  • Controller and electronic parts not included

The Luna line is eXtremeRate’s redesigned DualSense housing, with cleaner internal ribbing than its first-generation shells. This full set covers every visible surface: front plate, back plate, the complete button set and the touchpad cover, all in a glow finish that charges under room light and gives the pad a pale green cast in a dark room. Cut for BDM-030 through BDM-050, it suits pads shipping with current PS5 bundles and most replacement DualSense controllers bought recently.

The useful detail for modders is the ecosystem fit. The listing confirms the shell works with the maker’s RISE and RISE4 back-button remap kits, its face clicky kit and its LED kit, so you can plan a deeper build around the same housing. The plates sit flush, the clips line up, and the buttons drop into keyed holes that only accept the correct piece.

Best for: DualSense owners with a BDM-030, BDM-040 or BDM-050 pad who want a complete, one-and-done housing swap.

eXtremeRate Luna Wood Grain Front and Back Shell Set for PS5

Specs

  • Two-piece bundle: front shell with touchpad cover, plus back bottom shell
  • Fits PS5 DualSense models BDM-010, BDM-020, BDM-030, BDM-040 and BDM-050
  • Polycarbonate construction with a glossy finish
  • Wood grain patterned design
  • Part of the Luna redesigned shell range
  • Controller not included

Where the glow kit above targets the newer DualSense revisions, this wood grain set is the broad-coverage option. The same Luna front and back shell pairing spans the full run of DualSense model codes, from the launch BDM-010 to the current BDM-050, making it the safer buy for early pads. The shells are polycarbonate rather than ABS, with a glossy coat that shows off the printed grain.

The look is the point here: wood grain on a DualSense reads like a retro hi-fi panel. Note that this is a shell pairing rather than a button bundle. The front plate ships with its touchpad cover and the back plate is a separate item in the same package, but the face buttons, sticks and triggers carry over from your own controller, which keeps the job simpler since the board moves across as one assembly.

Best for: DualSense owners who want the widest model coverage and a warm, furniture-like finish.

eXtremeRate ASR Full Set Shell Buttons for Xbox Core

Specs

  • Fits Xbox Series X|S and Xbox Core controller, model 1914 only
  • Full set: front shell, back shell, battery cover and left/right back panels
  • Includes thumbsticks, accent rings, ABXY buttons, D-pad and full bumper/trigger button set
  • Rubberized handles with a molded diamond texture
  • T8 and T6 screwdrivers, opening tool and 17 screws included
  • Controller not included

The ASR kit is the most complete Xbox package in this guide. Alongside the front and back shells it brings a battery cover, the snap-on back panels, and an entire control set: thumbsticks, accent rings, ABXY buttons, the D-pad, and the bumpers, triggers and system buttons. The headline feature is the grip treatment: a rubberized coating with a raised diamond pattern on the handles, which adds real purchase for sweaty hands compared with the smooth stock housing.

This variant wears the maker’s Clown HAHAHA artwork, a loud comic style that will not suit everyone, but the ASR shell is sold across a wide color range on the same listing family, and every version shares the same mold and grip texture. Installation follows the usual model 1914 routine: security screws out, care around the side rails, then the board and button set move over. Having both T8 and T6 drivers in the box matters, because the 1914 pad uses both sizes.

Best for: Xbox Series X|S owners who want a full rebuild that upgrades grip feel as well as looks.

eXtremeRate Racing Green Front Faceplate for Xbox Series X/S

Specs

  • Front housing shell only; back shell, buttons and other parts not included
  • Fits Xbox Series X|S and Xbox Core controller, model 1914
  • Soft touch grip finish in Racing Green
  • Durable non-toxic ABS plastic
  • Includes one T8 screwdriver and 5 screws
  • Controller not included

Not every mod needs the full teardown. This Racing Green plate replaces only the front faceplate of the model 1914 Xbox pad, the surface you actually see while playing and the one that picks up the most scuffs. The soft touch finish has a matte, slightly rubbery feel, and the deep green is a color Microsoft itself has never offered on this controller.

The job is the lightest in this guide: remove the side rails, undo the front screws with the bundled T8 driver, lift the old plate away and clip the new one down. Your original back shell, sticks and buttons stay in place, so there is no board handling at all. The trade-off is a two-tone result, green over the stock black or white rear.

Best for: Xbox owners who want a color change and a soft touch feel with the shortest possible install.

eXtremeRate DIY Shell Buttons Set for Nintendo Switch

Specs

  • Covers the Switch console back plate and both left and right Joy-Con housings
  • Full button set: A/B/X/Y, direction buttons, SL/SR and ZL/ZR buttons
  • Console back cover includes the stand; Joy-Con housings include middle trays
  • Screwdriver handle with PH00 and Y00 bits, 55 screws and 6 springs included
  • Also includes an adhesive sponge pad and 2 speaker dustproof nets
  • Soft touch wood grain finish
  • Console, Joy-Con and electronic parts not included

This kit takes on the whole Switch handheld rather than a single pad. The console gets a new back plate with its stand, and each Joy-Con gets a full housing with its middle tray, so the machine looks coordinated docked or handheld. The button set is complete too, down to the small SL and SR buttons on the Joy-Con rail, and the wood grain finish gives the hybrid a warm, almost toy-like character.

Set aside the most time for this one. Joy-Con are small, packed assemblies with springs under the shoulder buttons that love to escape, and the listing’s guidance stresses care around the ZL and ZR mechanisms. The box helps: a handle with PH00 and Y00 bits, 55 screws, spare springs and the sponge pad and speaker nets that are easy to tear during disassembly. Work over a tray and photograph each stage.

Best for: Switch owners who want the console and both Joy-Con to share one custom look.

FAQ

Will a replacement shell fit my controller?
Only if the model codes match. DualSense kits are cut for either the early BDM-010/BDM-020 pads or the later BDM-030/BDM-040/BDM-050 group, the Xbox kits here fit model 1914 only, and Joy-Con shells do not fit the Pro Controller. The code sits on the rear label of most pads, so check it before ordering.

Do I need to solder anything to swap a shell?
No. A shell swap is screws, clips and ribbon cables only. The delicate parts are the DualSense touchpad cover, which is bonded and needs gentle heat, and the Joy-Con shoulder button springs. Every kit here includes the drivers the job needs, and each maker publishes a video walkthrough.

Does opening my controller void the warranty?
Opening a first-party controller generally voids its warranty with the platform holder, and a shell swap is easy to spot. Treat these kits as mods for pads out of warranty or cheap enough to risk, and keep the original shell and screws so you can return the pad to stock form.

Can I combine a shell kit with back-button or clicky kits?
Often, yes. eXtremeRate designs its DualSense shells to work with its RISE remap kits, face clicky kit and LED kit, and the Luna full set above lists that compatibility directly. Check that both kits name your controller’s model code, fit the internal kit first, then close the pad with the new shell.

Conclusion

A shell swap is the rare mod that fixes wear and adds personality in the same afternoon. DualSense owners on newer revisions get the cleanest full package from the Luna glow set, while the wood grain pairing covers every DualSense model code. Xbox players can choose between the ASR full set and the Racing Green faceplate for a ten-minute refresh. Switch owners willing to take on the fiddliest job get the biggest payoff: a console and Joy-Con set that match end to end. Whichever pad you own, confirm the model code, watch the maker’s install video first, and keep the stock shell safe in case you ever want to go back.

L
Liam Bennett
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Controller Shell Replacement Kits for Custom PadsCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.