Updated Nov 16, 2026· 7 min read

Key takeaways

  • Micro ATX: Smaller board at 244 by 244 millimetres, with fewer slots, which is useful for compact cases.
  • Mini ITX: The smallest common form factor at 170 by 170 millimetres, suited to small-form-factor gaming.
  • Workstation boards on a different standard: Some use special sizes that are neither ATX nor EATX, so check the maker’s dimensions.

Pick ATX unless you have a specific reason to need the extra space of EATX, because standard ATX boards fit nearly every mid-tower and full-tower case, cost less and carry enough slots for almost any gaming build. EATX (extended ATX) is wider and is built for boards that need more memory slots, more power delivery or more expansion than ATX can hold.

Our top picks

Top pickGIGABYTE B550M K AMD AM4 Micro-ATX Motherboard, Supports Ryzen 5000/4000/3000 Series Processors, DDR4, 3+3 Power Phase, 2X M.2, PCIe 4.0, USB 3.2 Gen 1, GbE LAN, Q-FlashGIGABYTE B550M K AMD AM4 Micro-ATX Motherboard
  • AMD Socket AM4: Ready to support AMD Ryzen…
  • Enhanced Power Solution: Digital 3+3 VRM Design and…
  • Advanced Thermal Armor: Chipset heatsinks for better heat…
Check price on Amazon
Also greatGIGABYTE B550 Eagle WIFI6 AMD AM4 ATX Motherboard, Supports Ryzen 5000/4000/3000 Processors, DDR4, 10+3 Power Phase, 2X M.2, PCIe 4.0, USB-C, WIFI6, GbE LAN, PCIe EZ-Latch, EZ-Latch, RGB FusionGIGABYTE B550 Eagle WIFI6 AMD AM4 ATX
  • AMD Socket AM4: Ready to support AMD Ryzen…
  • Enhanced Power Solution: Digital twin 10 plus3 phases…
  • Advanced Thermal Armor: Enlarged VRM heatsinks layered with…
Check price on Amazon
Also greatGIGABYTE B550 Gaming X V2 AMD AM4 ATX Motherboard, Supports Ryzen 5000/4000/3000 Series Processors, DDR4, 10+3 Power Phase, 2X M.2, PCIe 4.0, Front USB-C, GbE LAN, Q-Flash Plus, RGB FusionGIGABYTE B550 Gaming X V2 AMD AM4
  • AMD Socket AM4: Ready to support AMD Ryzen…
  • Enhanced Power Solution: Digital Twin 10+3 Power Phase…
  • Advanced Thermal Armor: Advanced VRM heatsink for better…
Check price on Amazon
ProductKey specs
GIGABYTE B550M K AMD AM4 Micro-ATX MotherboardAMD Socket AM4: Ready to support AMD Ryzen…
Enhanced Power Solution: Digital 3+3 VRM Design and…
Advanced Thermal Armor: Chipset heatsinks for better heat…
Check price
GIGABYTE B550 Eagle WIFI6 AMD AM4 ATXAMD Socket AM4: Ready to support AMD Ryzen…
Enhanced Power Solution: Digital twin 10 plus3 phases…
Advanced Thermal Armor: Enlarged VRM heatsinks layered with…
Check price
GIGABYTE B550 Gaming X V2 AMD AM4AMD Socket AM4: Ready to support AMD Ryzen…
Enhanced Power Solution: Digital Twin 10+3 Power Phase…
Advanced Thermal Armor: Advanced VRM heatsink for better…
Check price
GIGABYTE B650 AORUS Elite AX AMD AM5AMD Socket AM5: Supports AMD Ryzen 9000/Ryzen 8000/Ryzen…
DDR5 Compatible: 4*DIMMs with AMD EXPO & Intel…
Commanding Power Design: Twin 14+2+1 Phases with 70A…
Check price

As an Amazon Associate we earn from qualifying purchases at no extra cost to you.

Size Difference in Plain Terms

A standard ATX board measures 305 by 244 millimetres (12 by 9.6 inches). EATX is not as tightly standardised, so board makers use slightly different sizes, but it is commonly given as 305 by 330 millimetres (12 by 13 inches). That means EATX has the same height as ATX but is roughly 85 millimetres deeper. The extra width has to fit inside the case, and many standard cases simply do not have room.

Quick Reference

Feature ATX EATX
Typical dimensions 305 x 244 mm About 305 x 330 mm; varies by maker
Standardisation Defined standard Not strictly standardised
Case support Almost all mid and full tower cases Select full towers and some large mid towers
Memory slots Usually four on mainstream boards Four to eight, depending on platform
Expansion slots Up to seven Up to seven or more, with extra spacing
Typical use Gaming and general PCs Workstations, servers, extreme enthusiast boards
Cable routing Widely supported Can be tight on power cables near the edge

What Extra Space Buys You

More memory channels and slots

Workstation and server platforms often use more memory slots than a mainstream desktop socket. EATX gives room for them. Mainstream gaming sockets from AMD and Intel use two memory channels, with four slots on ATX boards, so a gaming build gains nothing from extra slots that the processor cannot use.

Stronger power delivery and more connections

Some high-end enthusiast boards are made in EATX to fit large regulator arrays, extra M.2 sockets and additional connectors. Such boards cost more and benefit mainly extreme overclocking and heavy storage setups. A well-built ATX board is usually enough for gaming.

Dual-socket and workstation use

Dual-processor boards generally use EATX or larger, because two sockets and their memory slots do not fit within ATX. If your build is a gaming PC, this does not apply.

Case Compatibility Is the Real Limit

Before buying an EATX board, read the case maker’s specification page for the maximum supported motherboard size. Some cases list EATX support but with caveats, for example that cable cutouts or radiator mounts conflict with the wider board. Others list a precise board depth. Because EATX dimensions vary, compare the board’s published depth with the case limit, rather than trusting the label alone. Standoff positions for ATX-compatible holes are shared, but extra mounting holes for EATX need a tray that includes them.

Power Supply and Cooling Notes

EATX boards often require extra power connectors, commonly additional 8-pin CPU power inputs, so check the board manual and ensure your power supply has them. Wider boards may block certain cable runs and fans on the case’s top or front, so allow time to plan airflow. Always power the system off and unplug it before touching internals, and never open a power supply.

Pick Table

Your build Choose
Typical gaming PC ATX
Streaming plus gaming on mainstream platform ATX
Workstation with lots of memory slots EATX, if the platform needs it
Extreme enthusiast board you already own EATX with a compatible full tower
Small or mid case ATX or smaller

Alternatives

  • Micro ATX: Smaller board at 244 by 244 millimetres, with fewer slots, which is useful for compact cases.
  • Mini ITX: The smallest common form factor at 170 by 170 millimetres, suited to small-form-factor gaming.
  • Workstation boards on a different standard: Some use special sizes that are neither ATX nor EATX, so check the maker’s dimensions.

Common Mistakes

  • Buying an EATX board without confirming the case’s maximum motherboard depth.
  • Assuming all EATX boards are the same size when they vary by maker.
  • Paying for EATX features that a mainstream gaming processor cannot use.
  • Forgetting extra CPU power connectors and cable length on larger boards.
  • Ignoring the cable cutout and fan clearance on the case’s edge.

Examples of Where EATX Appears

EATX boards are most common in workstation and server products and in a few extreme enthusiast gaming boards from motherboard makers. On a workstation platform, the extra depth carries additional memory slots and more space for expansion slots. On a flagship gaming board, the maker may use the room for a stronger regulator design, extra M.2 sockets and added headers. Neither of these is a requirement for a normal gaming system, which is why most builders never meet an EATX board.

Case Planning in Detail

When a case says it supports EATX, look at the exact depth figure in its manual and compare it with your board. A board that is deeper than the standard figure can cover cable cutouts on the right edge of the tray, which makes routing the 24-pin power cable and front panel cables harder. Consider the placement of the front fan or radiator too, because a wide board sits closer to the front of the case. Plan cables before mounting the board, route what you can behind the tray first, and leave enough slack for connectors near the edge.

Weight and Support

A larger board with a heavy cooler and graphics card puts more load on the tray and mounting points. Use every standoff supplied, make sure each one lines up with a hole in the board, and avoid forcing connectors. If the case has a vertical graphics card mount or a long card, check that EATX width does not conflict with it. If you move the system often, secure heavy components before transport and follow the case maker guidance.

When ATX Is Enough

If your processor uses two memory channels, you need no more than four memory slots, and your storage fits within the board M.2 sockets and SATA ports, ATX meets the need. Premium ATX boards from the major makers carry large regulator heatsinks, fast networking and multiple M.2 sockets, which covers nearly all gaming and content creation use. EATX becomes sensible when the platform itself demands the extra space, or when you want a specific flagship board that is only available in that size.

Safe Installation Habits

Whatever the size, switch the power supply off and unplug it before touching anything inside the case, and never open the power supply itself. Fit the I/O shield or confirm the built-in one is seated, install standoffs before lowering the board, and tighten screws evenly. If anything feels like it needs force, stop and read the manual or contact the board maker.

Frequently Asked Questions

Can an EATX motherboard fit in an ATX case?

Usually not. Standard ATX cases support up to ATX size, and EATX is wider. Only cases whose specifications list EATX support should be used.

Is EATX faster than ATX?

No. Board size does not determine speed. Gaming performance depends on the processor and graphics card, while EATX offers more room for slots and power delivery.

Does a gaming PC need EATX?

Almost never. Mainstream gaming processors work well on ATX boards, which have enough memory slots, M.2 sockets and expansion slots.

Are EATX dimensions standard?

Not strictly. Sources commonly give 305 by 330 millimetres, but makers can build slightly different sizes, so confirm the exact dimensions in the board manual.

Can an ATX board fit in an EATX case?

Yes. Cases that support EATX also support smaller sizes such as ATX, micro ATX and mini ITX, according to maker specifications.

L
Liam Bennett
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Can an EATX motherboard fit in an ATX case?
Usually not. Standard ATX cases support up to ATX size, and EATX is wider. Only cases whose specifications list EATX support should be used.
Is EATX faster than ATX?
No. Board size does not determine speed. Gaming performance depends on the processor and graphics card, while EATX offers more room for slots and power delivery.
Does a gaming PC need EATX?
Almost never. Mainstream gaming processors work well on ATX boards, which have enough memory slots, M.2 sockets and expansion slots.
Are EATX dimensions standard?
Not strictly. Sources commonly give 305 by 330 millimetres, but makers can build slightly different sizes, so confirm the exact dimensions in the board manual.
Can an ATX board fit in an EATX case?
Yes. Cases that support EATX also support smaller sizes such as ATX, micro ATX and mini ITX, according to maker specifications.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
ATX vs EATX Motherboard: Which Is Better for…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.