Key takeaways
- Compare the best RJ45 crimp tool kits for wired gaming setups, from pass-through crimpers with testers to full network tool kits with punch down tools.
A wired connection is still the most reliable way to feed a gaming PC or console, and the cleanest wired setups rarely rely on factory patch leads alone. Once you run bulk cable through a wall or across a room, you need to put your own RJ45 ends on it, and that means owning a crimper. A good kit bundles the crimper with the extras the job demands: a stripper, a cable tester, a supply of plugs and, for wall work, a punch down tool.
The five kits below cover the full range of home jobs. At one end sits a professional ratcheting crimper sold on its own. At the other end sit complete network tool kits with punch down tools and screwdrivers for whole-room wiring projects. Between them are pass-through kits that pair a crimper with a tester and enough connectors for a gaming room.
Disclosure: As an Amazon Associate, we earn from qualifying purchases made through links in this article, at no extra cost to you.
Quick Picks
| Product | Best for | ASIN |
|---|---|---|
| Klein Tools VDV226-110 Ratcheting Modular Crimper | Best pro-grade crimper only | B076MGPQZQ |
| Klein Tools 80072 RJ45 Cable Tester Kit | Best kit with LCD tester | B09TPLNBQ2 |
| Solsop Pass Through RJ45 Crimp Tool Kit | Best all-in-one pass-through kit | B0B6FGY947 |
| Hi-Spec 9pc Network Cable Tester Tool Kit | Best classic repair kit | B013QT1SDE |
| Gaobige 11-in-1 Network Tool Kit | Best kit with punch down tool | B0756SN86D |
How to Choose an RJ45 Crimp Tool Kit
Pass-through plugs versus standard plugs. This is the first decision, because the crimper has to match the plugs. With a standard plug, each conductor stops inside the connector body, so every wire must first be trimmed to the same length. With a pass-through plug, the conductors run through the body and out of the front face, so you can confirm the color order with the plug fully seated, and the crimper shears the excess flush as it crimps. Pass-through ends are far more forgiving for beginners. The two systems are not interchangeable: a standard-plug crimper cannot trim pass-through plugs, and at least one kit below is standard-only.
Ratcheting versus plain handles. A ratcheting crimper will not release until the crimp cycle completes, so every pin seats with the same force. That consistency matters when a single under-seated pin can knock a link down from gigabit speed to 100 Mbps or drop it entirely. For a full room of wall runs, a ratchet earns its keep.
What belongs in the kit. Beyond the crimper, four items do the supporting work. A jacket stripper saves you nicking conductors with a knife. A cable tester proves each finished lead before it goes into a wall. Boots protect the plug latch, the part that snaps off first. A punch down tool matters only if your run ends at keystone jacks or a patch panel; plug-to-plug runs never need one.
Cable category and wire gauge. Match the plugs to your cable: Cat5e, Cat6 and Cat6a differ in conductor thickness and jacket diameter, and a plug bored for Cat5e will fight you on Cat6a. Included plugs below usually accept 24 to 26 AWG conductors. Shielded cable needs shielded plugs with a metal shell and drain-wire path, which only some crimpers and plugs here support.
Tester type. Simple LED testers light one lamp per pin and flag opens and crossed pairs well enough for patch leads. LCD testers go further, drawing a wiremap and naming the fault, which helps when a long run misbehaves and you must decide which end to cut off and redo.
Klein Tools VDV226-110 Ratcheting Modular Crimper
Specs
- Full-cycle ratcheting crimper with built-in wire stripper and cutter
- Crimps RJ45 Pass-Thru connectors and RJ11/RJ12 standard plugs
- Suits CAT3, CAT5e and CAT6/6A paired-conductor cable
- Wiring diagram printed on the tool body
- Flush trim cuts conductors level with the plug face
- Item weight 14.4 ounces; comfort-grip handles; plugs sold separately
This is the tool-only pick for buyers who already own a tester and a jar of plugs. The full-cycle ratchet is the headline feature: the handle will not open until the crimp finishes, so a distracted squeeze cannot leave a half-seated pin behind. The printed wiring diagram on the body removes the need to keep a pinout card nearby.
Because it strips and cuts as well as crimps, the VDV226-110 can be the only tool you hold during a plug-to-plug run. It handles Klein pass-through plugs for RJ45 and standard RJ11/RJ12 plugs for phone lines. No case or bundle padding, just a compact 14.4-ounce tool for a drawer beside the gaming desk.
Best for: buyers who want one durable, ratcheting pass-through crimper and already own testing gear.
Klein Tools 80072 RJ45 Cable Tester Kit
Specs
- Three-piece kit: LAN Scout Jr. 2 cable tester, crimper/stripper/cutter tool, 50-pack of Pass-Thru modular plugs
- Tester checks CAT5e, CAT6 and CAT6A cables terminated with RJ45 plugs
- Large backlit LCD shows wiremap results in dim rooms and racks
- Fault detection covers opens, shorts, miswires, split pairs and crossovers
- Crimper handles RJ11/RJ12 standard and RJ45 Pass-Thru connectors
- Tester runs on a 9V battery, which is not included
The 80072 builds on the same pass-through system as the crimper above, then adds the step most home kits skip: proper fault finding. The LAN Scout Jr. 2 draws the wiremap on a backlit LCD and names the fault, so a bad run tells you whether you crossed a pair, split a pair or left a pin open.
Fifty pass-through plugs come in the box, enough for a gaming room, a streaming corner and a run to a ceiling access point. The crimper also strips and cuts, with a coax side for cable-TV lines. Plan on adding a 9V battery for the tester before your first job.
Best for: home network builders who want LCD wiremap diagnostics bundled with a proven pass-through crimper.
Solsop Pass Through RJ45 Crimp Tool Kit
Specs
- Pass-through crimper that cuts, strips and crimps in one tool
- Network cable tester included, with PoE test support
- 50 Cat6 pass-through connectors and 50 connector boots in the box
- Mini cable stripper and spare replacement blades included
- Included plugs suit 24 to 26 AWG conductors with gold-plated contacts
- Model Crimper Kit 28; yellow finish; kit weight 0.76 kg
Solsop’s kit is the value play for plug-to-plug work. Everything for a patch-lead session is in one box: the pass-through crimper, a tester, fifty Cat6 pass-through plugs and fifty boots. The plugs push through the connector body so you can check the T568 order before you squeeze, and the crimper trims the ends flush, removing the fiddliest step for first-time cable makers.
The tester is a simple unit rather than an LCD wiremap tool, but it confirms continuity on each pin and adds PoE test support, handy if a run will later feed a powered access point. Spare blades help, since the flush-cut blade dulls first. One listing warning: never test a cable while it sits in the crimper, as a short can damage the tester.
Best for: first-time cable makers who want crimper, tester and a full stock of Cat6 plugs in one purchase.
Hi-Spec 9pc Network Cable Tester Tool Kit
Specs
- 9-piece kit packed in a zipper case
- Tester box with detachable remote unit and dual-speed scan modes
- LED readout covers pins 1 to 8 plus ground and shield lines
- Crimper positions for 4P4C, 6P6C and 8P8C plugs (RJ11, RJ12, RJ45)
- Krone punch down tool and rotary coax stripper included
- 12 connectors in the box: 6 RJ45 and 6 RJ11; tester needs a 9V battery, not included
Hi-Spec’s long-running kit takes the repair-bag approach. The detachable remote on the tester is its best trick: clip it on at the far end of a fixed run and you can prove a cable that spans two rooms on your own, and the dual-speed scan keeps the LED chase readable on long leads. The crimper uses a pass-through die for standard modular plugs across phone and Ethernet sizes.
The rest of the case covers the odd jobs around a network fix: a Krone punch down tool for keystone and block work, a rotary coax stripper for TV lines, a flat mini-stripper and spring-loaded clippers. Connector stock is thin at twelve pieces, so treat the plugs as a sampler and order more Cat6 ends alongside. Everything suits Cat5, Cat5e, Cat6 and Cat7 cabling plus RJ11 phone wiring.
Best for: troubleshooting and repair work on existing home wiring, especially runs that span two rooms.
Gaobige 11-in-1 Network Tool Kit
Specs
- 11-in-1 kit carried in a tool bag
- 3-in-1 crimper cuts, strips and crimps 8P, 6P and 4P plugs
- Cable tester flags wrong connections, short circuits and open circuits
- 110 punch down impact tool, two strippers, slotted and Phillips screwdrivers
- Cat5e RJ45 connectors, 6P4C phone connectors and connector covers included
- Listing note: this crimper suits standard plugs and does not fit pass-through connectors
Gaobige aims at the whole structured-wiring job rather than patch leads alone. Alongside the crimper and tester you get a 110 punch down impact tool for keystone jacks and wall plates, two strippers for different cable shapes, plus screwdrivers for the plates. For a gaming room wired back to a small panel, that spread saves a second toolbox trip.
One limit deserves plain words: the crimper works with standard plugs only, and the listing warns against feeding it pass-through connectors. Standard plugs demand careful, even wire trimming before insertion, which slows each end a little. In exchange, standard plugs are the cheapest, most widely stocked ends you can buy, and the kit includes a supply plus covers and a connector box.
Best for: whole-room wiring jobs with keystone jacks and wall plates, where the punch down tool will actually be used.
FAQ
What is the difference between pass-through and standard RJ45 plugs?
On a standard plug the eight conductors stop inside the connector body, so each wire must be trimmed to an even length before insertion. On a pass-through plug the conductors exit the front face, letting you verify the color order after seating while the crimper shears the excess flush during the crimp. Pass-through is easier to get right; standard plugs are cheaper and work with any basic crimper.
Do I need a ratcheting crimper for a home gaming setup?
Not for a cable or two, but a ratchet helps as the count grows. It locks the handle until the cycle completes, so every pin seats with equal force and no plug leaves half-crimped. A half-seated pin is a classic cause of a link that connects at 100 Mbps instead of gigabit speed — the exact fault a gaming setup cannot afford.
Can one crimper handle Cat5e, Cat6 and Cat6a cable?
Usually yes on the tool side, since the 8P8C crimp die geometry is shared. The plugs are the part that must match: Cat6a uses thicker conductors and a wider jacket than Cat5e, so buy plugs bored for your cable category and check the AWG range on the plug pack against your cable before a run.
Why test a cable after crimping it?
Because a plug can look perfect and still hide a crossed pair, a split pair or a pin that never pierced the conductor insulation. A tester checks all eight pins end to end in seconds and names the fault, while the cable is still on the bench and the ends can be cut off and redone. Finding that fault once the cable is inside a wall is a far longer job.
Conclusion
The choice comes down to how much of the job you want in one box. The Klein VDV226-110 is the crimper to buy once if your tester and plugs are already sorted; the Klein 80072 wraps the same system around an LCD tester and fifty plugs. Solsop’s kit undercuts both as a complete pass-through bundle, while the Hi-Spec set suits repair work on wiring already in the walls. If your run ends at keystone jacks, the Gaobige 11-in-1 is the one with the punch down tool to finish that job. Match the kit to your wall plates, and every cable you make is the exact length your setup needs.
FAQ
What is the difference between pass-through and standard RJ45 plugs?
Do I need a ratcheting crimper for a home gaming setup?
Can one crimper handle Cat5e, Cat6 and Cat6a cable?
Why test a cable after crimping it?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.




